HydROtwist 2.4L Under Sink Instant Hot & Chilled Water Dispe

Please Choose:


 0 avg by 0 reviews



Online Only Special
$1,399.00
$300.00  (18%) off RRP








More Images: (1)


HydROtwist under sink instant hot and chilled water dispenser HTC2000 with a premium water filter system, complete with a designer dual faucet/tap that dispenses both instant hot & chilled filtered water.

This is a premium alternative to the Insinkerator HC1100 & GN1100 because it comes with a choice of different filter systems and comes with a standard 2 year ^warranty.

Product features:

Energy-efficient: Consumes less electricity than a 40 watt light bulb.

One Piece Internal Tank to prevent leaks and malfunction.

Green Material: Thermal insulation meets the UL94 standard.

Prevents Empty Burnout: Automated heater protection.

Innovation: SUS304 Ring type heater larger heating area, faster heat conduction, more power-efficient and longer running life.

New Innovation: Self-priming expansion chamber.

Design: Newly designed model greatly reduces dripping (the flaw of traditional instant hot water dispensers.)

Boiler Dimensions: W20cm x D23cm x H30cm

Under Sink Water Chiller

The IC8 Compact Remote/under-sink chiller is designed for use with our single, twin, triple and reverse osmosis water filter purification systems.

It can be conveniently installed under a sink or bench or anywhere that suits. Suitable for small or medium commercial applications.

Cabinet: The IC8 is constructed of "Galvalume," a material with the ideal blend of Aluminium Zinc and silicone which provides the IC8 with superior heat and corrosion resistance. White powder coat finish.

Chilling & Storage Tank: Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independantly tested to withstand over 800psi static pressure.

A drain plug and seal is provided, which is removable for servicing.

The internal waterlines are 1/4" OD stainless steel and are heliarc welded to eliminate corrosion.

Refrigeration System: This fan assisted, static condensor system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts.

The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.

Cooling Performance: 8 Litres Per Hour at 10 degrees celsius.

Cooling speed: From 27 degrees to 10 degrees in 21 minutes.

Plumbing Connections: Both inlet and outlet are recessed, 1/4" stainless steel pipes, suitable for connection to industry standard 1/4" quick connect fittings and tubing.

Chiller Dimensions: 210mm (W) x 410mm (D) x 290mm (H)

Water Filter System Options:

This unit comes standard with a single HydROtwist quick change 5 micron granular activated carbon filter and you have the option of upgrading to a single premium quick change 1 micron water filter system or a twin premium scale reduction 1 micron water filter system that will provide better tasting water and prevent lime scale build up within the system. Choice of the folllowing filter options available:

HydROtwist premium single quick change 5 micron granular activated carbon (Included as the standard filter)

HydROtwist premium single quick change 1 micron carbon block

HydROtwist premium twin quick change with 5 micron GAC/PHO scale reduction pre filter & 1 micron carbon block post filter

The instant Hot & Chilled water dispenser comes complete and ready to install.

Kit Includes:

- 1/2" Connection Kit with Ball Valve and Pressure Limiting Valve (PLV)

- Stainless Steel Tank with Tubing and Fittings
- Premium HydROtwist IC8 Under Sink Chiller
- Designer Dual Faucet/Tap
- Choice of Water Filter System. Please choose above

- 2 Year Warranty*

Boiling Cups: 60 cups per hour at approx 93 degrees celsius
Chilled Cups: 40 glasses per hour at approx 6 degrees celsius

*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.

(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)

**Filter replacement service/maintenance is available in the Sydney metro region ONLY.

**This is only to be used as a guide. Water filters should be installed by a professional.

^Warranty will be void if water filter cartridges are not replaced as per the specified time period by the manufacturer.


Instant Hot Specifications: 

- Instant hot/chilled under sink water dispenser that supplies hot and chilled filtered water instantly. 

- Patented self-priming expansion chamber that absorbs the steam for re-usage. This new design greatly reduces dripping (the flaw of traditional instant hot water systems.) Due to the high temperature of water during heating, the tank is under pressure. The self-priming expansion chamber can decrease pressure,thus preventing, dripping and leaking.

- Automated Heater Protection. When there's no water left in the tank, the self re-setting thermal fuse protects the product from dry boiling and dry start up.

- SUS316L Ring Type Heater is more advanced than traditional U-shaped heaters. It's relatively more hygienic and durable. The heat conduction area of a ring type heater is twice as large as traditional U-shaped heaters. It has features of faster heat conduction, more power-efficient, and a much longer life span. 

- A large 2.4 litre stainless steel tank supplies 60 cups per hour. The inner tank is secured with clamps allowing it to be easily removed and cleaned. The tank is made of ST304 SS, built in integral body. There are no weld joints or seams on the tank, therefore leaks are unlikely to occur.

Instant Chilled Specifications:

- Electrical Connections: The IC8 is furnished with 1.8 metre GPO power cable and plug. 240volts, 50Hz. Single Phase. 

- Running amps 0.74A. 

- Power Consumption 120W

- Weight and Dimensions: 12.5kg 210mm (W) x 410mm (D) x 290mm (H)

- Warranty: The IC8 water cooler is covered by a 2 year comprehensive warranty.

There are no compatible products available.

There are no also purchased products available.

There are no reviews on your listing!

  • Model: HTC2000
  • Shipping Weight: 25kilos
  • Manufactured by: HydROtwist




Subscribe to our newsletter to get latest news about water filters