4 x Instapure R2 R2C R2CB Waterpik Replacement Water Filter USA

Please Choose:


 0 avg by 0 reviews



Online Only Special
$48.00
$28.00  (37%) off RRP


Sold Out






More Images: (1)


4 x Instapure R2 Replacement Cartridges
 
Instapure R2, R2CB, R-2C, R-2CE are all part numbers for these that suit the Waterpik tap filter Models F-2, F2CE, F-3 & F-6, F-6E, F7.
 
Removes Dirt, Sediment, Rust, Chlorine, Chemicals, Bad Taste & Odours.
 
These filters have an endless shelf life if unused, so buy in bulk and save.
 
The Essentials R2 Faucet Filter Replacement Cartridge fits the Instapure F2 Faucet Water Filter System as well as the F3, F5 and F7.
 
- Reduces chlorine taste and odor for better drinking water
- Cost effective alternative to bottled water
 
Installation Instructions:
 
1. Unscrew the filter cover and set aside
2. Grasp the used filter on one hand and the filter unit in the other hand
3. Lift the used filter straight up and discard
4. Remove the red plug (if present) from the bottom of the new filter
5. Align the holes in the new filter with the white discs in the filter unit
6. Press the filter straight down
7. Screw the cover back into place
8. Flush the new filter for 2 minutes (and for a few seconds before each use)

Reduces the Following:
 
- 92% of Chlorine
- Bad Taste & Odor
 
The R2 does not remove beneficial fluoride
 
Operational Information:
 
- Filter Life: 3 months to 200 gallons
- Flow Rate: 0.75 gallons per minute
- Operating Pressure: 20 - 100 psi
- Operating Temperature: 40 - 100 F
- Actual Size: 3″ x 2″
 
UPC: 891465002131

There are no compatible products available.

There are no also purchased products available.

There are no reviews on your listing!

  • Model: R2-4
  • Shipping Weight: 0.5kilos
  • Manufactured by: Instapure




Subscribe to our newsletter to get latest news about water filters