Home :: Under Sink Filter Systems :: Undersink Water Chillers :: IC8 Under Sink Remote Water Chiller Cooler 8L per hour

IC8 Under Sink Remote Water Chiller Cooler 8L per hour

Please Choose:

Need a pressure relief kit?

0 avg by 0 reviews

Online Only Special
$499.00
$100.00 (17%) off RRP

The IC8 Compact Remote/under-sink chiller is designed for use with Single, Twin, Triple and Reverse Osmosis water filter purification systems.

It can be conveniently installed under a sink or bench or anywhere that suits. Suitable for domestic or small office applications.

Cabinet: The IC8 is constructed of "Galvalume," a material with the ideal blend of Aluminium Zinc and silicone which provides the IC8 with superior heat and corrosion resistance.

Chilling & Storage Tank: Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independantly tested to withstand over 800psi static pressure.

A drain plug and seal is provided, which is removable for servicing.

The internal waterlines are 1/4" OD stainless steel and are heliarc welded to eliminate corrosion.

Refrigeration System: This fan assisted, static condensor system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts.

The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed.

Cooling Performance: 8 Litres Per Hour at 10 degrees celsius.

Cooling speed: From 27 degrees to 10 degrees in 21 minutes.

Plumbing Connections: Both inlet and outlet are recessed, 1/4" stainless steel pipes, suitable for connection to industry standard 1/4" quick connect fittings and 1/4" or 3/8" Tubing.

Electrical Connections: The IC8 is furnished with 1.8 metre GPO power cable and plug. 240volts, 50Hz. single Phase. Running amps 0.74A. Power Consumption 120W

Weight and Dimensions: 12.5kg 210mm (W) x 410mm (D) x 290mm (H)

Warranty: The IC8 water cooler is covered by a 2 year comprehensive warranty.

Please note its highly reccommended that a PRV Pressure Relief Valve Kit be isntalled on all under sink water chillers to prevent damage to the unit.

*Installation is available in the Sydney metro region ONLY . If you are located out of the Sydney metro region or interstate we can supply details of a local plumber/installer after purchasing your filter system. Price above is for a standard installation within the Sydney Metro Area with water supply within 1.5m of installation point and tap/faucet installed on a laminate/wooden bench top or in a stainless steel sink. Non standard installations will incur an extra fee.

(Please Note: NON Standard Installations will incur an extra fee of $65.00 + any parts/fittings required - Granite, marble and/or stone benchtops will incur an additional fee of $45.00)

**Filter replacement service/maintenance is available in the Sydney metro region ONLY.

**This is only to be used as a guide. Water filters should be installed by a professional.

There are no compatible products available.